| |
::
SINGLE FACED SLUICE
For
wall mounting at intake or discharge, or for open channels or closed conduits,
available with circular, square or rectangular opening. They can be supplied with
rising or non-rising spindle and wherever necessary with suitable floor mounted
headstocks with extension stems, couplings. (torsional or tensional) and guide
brackets.
| |  |
Wall
mounted spigot back type | | Flanged
back with a wall thimble | | | | |
Standard
cast iron s/f/s range with bronze/brass trim :
Type | Size | Suitable
for head(metre of water) | Circular/Square/Rectangle | 300-2500 | 5,10
(unseating) | | | 10,15
(seating) | | | For
large sizes up to 4000 mm steel fabricated s/f/s can be supplied with rubber sealing
and flush bottom design. | | | Sluice
gates can be made generally conforming to IS-3042 / IS-13349 / AWWA-C501 / BS
7775. |
OPERATION
| | Manual,
with or without gearing (spur, bevel or worm gear, depending upon size) | | | Electric
actuator, with or without gearing. | | | Pneumatic
cylinder, with or without mannual over-ride. |
NOTE
:
| Can
be supplied with stainless steel trim and for a reasonable batch quantity, frame
and door in stainless steel. |
| | |
|
